MNR 350 – BMC5/6 (Ex)

Autonomous high pressure supply and adjustment system for Beamex MC5 and MC6 Multifunction Calibrator. New: The IS version of the case available to be used in combination with the Beamex MC6 ex.

This case offers improved efficiency to quickly and safely perform clean, high pressure calibrations at your own location.

  • Supports pressure ranges with full scale from 20 MPa down to 0.7 MPa in a single system
  • Simple, compact and easy to operate
  • Built-in refillable 28 MPa storage tanks for pressure supply
  • Precise test pressure control using a pressure balanced volume controller
  • Protected against overpressure
  • Three analogue pressure gauges for monitoring pressure in storage system, regulated supply pressure and pressure at test ports
  • Two test ports
  • 316 SS high pressure tubing and fittings
  • Additional option: ATEX certified version available (BM6 IS) for use in potentially explosive atmospheres.

Watch this explanation video:

Self contained unit provides pneumatic pressure for calibration and testing up to 250 bar using a Beamex MC6 (Ex) multifunction calibrator with pressure module.

The unit is designed as an additional tool for your Beamex MC6 multifunction calibrator allowing fast and safe generation of high pneumatic pressure up to max 20 MPa.

© Minerva Meettechniek B.V. all rights reserved

 

[et_pb_section admin_label="section"]
[et_pb_row admin_label="row"]
[et_pb_column type="4_4"][et_pb_text admin_label="Text"]

OPERATION

The built-in high pressure gas storage system is filled through the appropriate connection. Three separate monitor gauges are mounted to indicate storage system pressure, regulated pressure and pressure at test ports. The maximum test pressure is set using the supply regulator. The test pressure at the two test connections is precisely controlled by two fine metering needle valves and the pressure balanced volume adjuster.

The installed Beamex MC5/6 multifunction calibrator displays the test pressure. Externally generated pressures can also be measured via the test connections. The instrument is supplied with quick-connect test and filling hose, a 1⁄4" NPT male adaptor for the test connection and filling and a refill connector.

IEC/ATEX certified IS version BMC6 EX

Are you using the High Pressure Case in situations that require an IS calibrator? Then choose the IEC/ATEX certified case, especially designed and certified for controlling conditions in an explosive atmosphere.

[/et_pb_text][/et_pb_column]
[/et_pb_row]
[/et_pb_section]

TECHNICAL SPECIFICATIONS

Pressure ranges See Beamex MC6 digital pressure modules supported table in brochure
Pressure measurement specs See Beamex MC6 digital pressure modules supported table in brochure
MNR 350 control range 0 - 20 MPa gauge pressure
Gas storage system 2 x 1 litre capacity, filling pressure limited to 28 MPa, tested to 45 MPa
Monitor gauges 40 mm, analogue, all stainless steel:
gas bottle pressure, regulated supply pressure, pressure at test port
Pressure regulator Minerva Model 180 high pressure regulator, Range 0 - 25 MPa
Volume adjuster Minerva Model 90, pressure balanced volume adjuster, displacement 11 cm3 max 67 turn, precise pressure setting to within 100 Pa, stainless steel interior
Needle valves Fine control valve for test pressure inlet and exhaust
Connections Low volume Minimess 1215, quick connect couplings with internal check valve
Test / filling hose Minimess 1215, length 2 meter, including 1⁄4" NPT male connector
Refill connection For connection to nitrogen bottle, standard RU-3
Quick lock system in lid Quick lock system for storing test hose and test connector
Housing Pelicase. Material: ultra high impact copolymer
Dimensions 405 x 295 x 255 mm (L x W x H)
Weight Approx. 19 kg
Certification Pressure Equipment Directive (PED), Transportable Pressure Equipment Directive (TPED), CE conformity declaration
ATEX zone II 3G Ex ic IIB T6 Gc (-10°C ≤ Ta ≤ +50°C)
Accessories included 2 meter test / filling hose, 1⁄4" NPT male test adaptor, RU-3 refill connection
Documentation included Manual, PED conformity declaration, TPED conformity declaration, CE declaration
Ordering code  MNR-350-BMC5 or MNR-350-BMC6
Ordering code ATEX version MNR-350-BMC6-ex

 

 

MODEL NAME

DESCRIPTION

MNR 350 - BMC5/6 Autonomous high pressure supply and adjustment system for Beamex MC5 or MC6 Multifunction Calibrator
MNR 350 BMC6-ex

 ATEX version of this case for Beamex MC6-ex

 

Request a quote - Shop

  • Any additional requirements? Please let us know.
  • This field is for validation purposes and should be left unchanged.

Call Now Button