Wavetek / Datron 4600 Transconductance Amplifier

Home → Calibration Services → Wavetek Datron calibrations → Wavetek / Datron 4600 Transconductance Amplifier

Have your Wavetek /Datron 4600 Transconductance Amplifier calibrated in the ISO 17025 accredited lab!

Minerva is specialized in repair and calibration services of WAVETEK DATRON instruments. These Wavetek/ Datron instruments are calibrated in a ISO 17025 accredited calibration lab.  

The calibration is performed by calibration technicians. We have many years of experience in calibrating Wavetek / Datron instruments. In short, your Wavetek / Datron instrument is taken good care off!

We focus on a reliable lead time and high standard of our service.

Wavetek / Datron 4600 Transconductance Amplifier

The Waketek 4600 Transconductance Amplifier extends the current sourcing capabilities of the Datron range of Multifunction Calibrators and Standards to 11A DC or RMS AC. Wavetek 4600 features amongst other things:

  • Extends calibrator currents to 11A DC & AC RMS
  • Slave mode programmable from 4708,4700 & 4705
  • Solo mode operation for general application
  • AC performance from 10 Hz to 20 kHz
  • Solo Mode:
    • Converting a voltage input to a current output, with a transfer characteristic of 1 Amp DC or AC output for 1 V DC or AC input, it may be coupled to any convenient voltage source
    • With total 90 day, ± 1 °C accuracies to ± 125 ppm (DC currents from 0 to 11A) and ±430 ppm (AC currents from 0.9 to 11A at frequencies from 10 Hz to 5 kHz)
    • Slave Mode: Used in conjunction with a compatible model 4707, 4700 or 4705, two cables connect the Transconductance Amplifier to the Calibrator.
  • Total Uncertainty Relative to Voltage Source: 90 day, 23°± 1°C±80 ppm output ±500uA