PicoVACQ Temperature platinum sensors

High technologies in the smallest volume you can imagine. Measure temperature during your thermal validation processes, even in the smallest packagings.

High technologies in the smallest volume you can imagine. Measure temperature during your thermal validation processes, even in the smallest packagings.

PicoVACQ is the most miniaturized family of products from TMI-Orion. The latest electronic technologies are used while performances are boosted and dimensions reduced to the smallest loggers possible. Specially designed for clean industries, all the models of this family enable control and process validation of food or pharmacy industries. Among the most common applications : - control of sterilization (steam or ethylene oxide), - freezer mapping, - temperature measurement in microwave ovens, - control of pasteurization.

High technologies in the smallest volume you can imagine. Measure temperature during your thermal validation processes, even in the smallest packagings.

PicoVACQ 1T1

1 internal temperature sensor

PicoVACQ 1Tc

1 temperature sensor at the end of a rigid probe of 3mm in diameter and length to be determined between 10 and 100 mm.

PicoVACQ 1Td

1 temperature sensor at the end of a flexible or semi-rigid probe enabling temperature measurement between -70°C and 140°C. Battery to be defined according to application. Also available with long rigid probes.

PicoVACQ 1tdi

1 temperature sensor at the end of a connectable thin flexible probe. Fine for temperature control in dry-freezer (down to -70°C).

PicoVACQ Microwave

Two special versions for temperature measurement inside micro wave ovens: to be pinned into the food or immersed in a liquid. To control temperature (calculation of sterilization value, Pasteurization unit and cooking value), place the probe directly inside the smallest packagings. All the above PicoVACQ Temperature models are available with EX version for applications in explosive environment.  

Request a quote - Shop

  • Any additional requirements? Please let us know.
  • This field is for validation purposes and should be left unchanged.