P5514 Comparison Test Pumps
These instruments are used for checking pressure measuring instruments against master test gauges, indicators or transducers.
- Generates pressures to 10,000 psi (700 bar)
- Bench mounted design
- Operational with a wide range of fluids
- Screw press for fine pressure adjustments
These instruments are used for checking pressure measuring instruments against master test gauges, indicators or transducers. These hydraulic test pumps provide a quick and easy solution for checking pressure measuring instruments to 10,000 psi (700 bar).
Specifications |
|
| Pressure Range | 0 to 10,000 psi (700 bar) |
| Test Port Adapters | (2 sets) 1/8, 1/4, 3/8 and 1/2 NPT or BSP |
| Instrument Size (W x D x H) | 11 x 11 x 10 in (280 x 280 x 254 mm) |
| Instrument Weight | 11 lb (5 kg) |
| Reservoir Volume | 75 cc |
| Screw Press Displacement | 20 cc |
| Fluid Media |
The standard O-ring seals are Nitrile®, Viton® or Ethylene Propylene seals are available for use with solvents, fuel oils, brake fluids or other similar aggressive fluids. Orings P5514: Nitrile |
Accessory |
Description |
|---|---|
| 5540 Metric and 5541 BSP Adapter Sets | P5540 Metric M14 x 1.5, M20 x 1.5, 1/8 and 1/4 BSPP5541 BSP 1/8, 1/4, 3/8 and 1/2 BSPP5542 NPT 1/8, 1/4, 3/8 and 1/2 NPT |
| P5521 and P5522 Liquid-to-Liquid Separators | These liquid-to-liquid separators connect directly to the test port of a hydraulic deadweight tester or comparison test pump. A flexible diaphragm separates the fluids, protecting the calibrator from contamination, and allows calibration of the device in its specific working fluid. |
| P5543 Angle Adapter | To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges at 90º. The maximum working pressure of this unit is 10,000 psi (700 bar). |
| P5544 Two Gauge Stand | This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar). |
| P5551 Pointer Remover/Punch | This tool is designed to quickly remove and consistently refit the pointer of a pressure gauge. |
Product manuals
Data sheets
