9260 Mini Fixed-Point Cell Furnace provides a fixed-point system that cuts in half the financial investment required to do fixed-point calibrations
This furnace costs less than half of a large furnace and works with indium, tin, zinc, and aluminum cells to cover all ITS-90 fixed points from 156.5985 °C to 660.323 °C. The cells themselves, using a smaller volume of 99.9999 % pure metal, also cost much less. But cost is only a part of the issue.
The 9260 makes using fixed points easy. Simply insert the cell at the end of the day and let it sit overnight. The next morning, initialize the built-in software routine for your specific cell. Come back in an hour, verify the stability of the cell, and you can take measurements for the rest of the day from a near-perfect temperature source!
The built-in software lets you choose between using melting-point curves or freezing-point curves for each metal. The ITS-90 calls for freezing points, but melting points are easier to realize, and the difference in uncertainty (less than 2 mK for most applications) is generally insignificant. In fact, the difference between using traditional cells at their freezing points and Fluke Calibration’s mini cells at their melting points is not significant for most labs in most applications.
Comparison blocks are also available for the 9260 for high-precision comparison calibrations at high temperatures. Two blocks are available with a variety of pre-drilled wells in addition to blank or custom blocks. Well depth is 229 mm (9 in).
|Temperature Range||50 °C to 680 °C|
|Ambient Operating Range||5 °C to 45 °C|
|Stability||±0.03 °C to 300 °C ±0.05 °C above 300 °C|
|Vertical Gradient||Top and bottom zones adjustable by offset|
|Plateau Duration||6–10 hours typical|
|Display Scale||°C or °F, switchable|
|Immersion Depth||229 mm (9 in)|
|Stabilization Time||15 minutes nominal|
|Fault Protection||Sensor burnout and short protection, over-temperature thermal cutout|
|Display Accuracy||±0.2 °C to 300 °C ±0.3 °C to 450 °C ±0.5 °C to 680 °C|
|Comparison Block||Two multi-hole blocks, blanks, and custom blocks available|
|Well-to-Well Gradient (in comparison block)||±0.02 °C|
|Heating Time||1.25 hrs. from 25 °C to 680 °C|
|Cooling Time||10.5 hrs. from 680 °C to 100 °C|
|Power Requirements||115 VAC (±10 %), 60 Hz, 11 A, or 230 VAC (±10 %), 50 Hz, 6 A, specify, 1200 W|
|Exterior Dimensions (HxWxD)||489 x 222 x 260 mm (19.25 x 8.75 x 10.25 in)|
|Weight||20.5 kg (45 lb.) with block|
|9260||Mini Fixed-Point Furnace (for In, Sn, Zn, Al cells)
|5914A||Mini Quartz Indium Cell
|5915A||Mini Quartz Tin Cell
|5916A||Mini Quartz Zinc Cell
|5917A||Mini Quartz Aluminum Cell
|5944||Mini Metal Cased Indium Cell
|5945||Mini Metal Cased Tin Cell
|5946||Mini Metal Cased Zinc Cell
|5947||Mini Metal Cased Aluminum Cell