Designed to be used with an hydraulic deadweight tester or hydraulic calibrator for testing and calibration of pneumatic instruments
The MNR 140 oil-gas separator is designed to be used with an hydraulic deadweight tester or hydraulic calibrator for testing and calibration of pneumatic instruments up to 300 bar. The MNR 140 has a monitoring glass showing the separation of the fluid and gas. Since there is no diaphragm between the oil and gas inside the unit does not affect the measurement uncertainty of the calibration.
The MNR 140 can also be supplied with an optional gas pressure control unit, the MNR 145. The MNR 145 is connected
to an external gas pressure source for fee- ding the system. The MNR 145 allows the user to have accurate control of the gas pressure connected to the top connection of the MNR 140 oil/gas separator.
The MNR 140 oil-gas separator in com- bination with the MNR 145 gas pressure control unit enables oil free calibrations with your existing dead weight testers in a safe way.
|Model||MNR 140 Oil / gas separator|
|Connections||Bottom 3/8“ BSP male Top 1/4” NPT female|
|Dimensions||110 x 65 mm (length x diameter)|
|Maximum operating pressure||300 bar / 30 MPa / 4500 psi|
|body||Stainless steel 304|