The 754 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software.
The 754 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. The 754 also features a powerful built in HART® interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.
The 754 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 375 HART communicator.
|ABB/Hartmann & Braun||Contrans P1,
AS 800 Series
|Endress & Hauser||CERABAR S,
|TMT 1221,TMT 1821,
|Siemens||SITRANS P DS
SITRANS P ES
|Yokogawa||EJA||YTA 110, 310
1Sensor Trim not supported
The 754 supports the commands contained in HART protocol Version 5.7. With 2 MB of memory, the 754 supports a substantial set of HART instructions:
HART Operating Modes Supported
Covers virtually any pressure application including gauge, differential, dual (compound), absolute, and vacuum.
A family of 29 optional pressure modules provides pressure calibration and measurement capabilities. Twenty-eight modules are available, with basic accuracy specs to 0.05%. Ranges start at 0 — 1 in H20 (0 — .25kPa) and go to 0 — 10,000 psi (0 — 70,000 kPa). Additional information about pressure modules is available on the Pressure Modules Home Page.
Allow you to quickly set up powerful, automated calibration procedures for linear transmitters, DP flow transmitters, and one- and two-point limit switches. Simply select the appropriate measure and/or source functions and fill out the procedure template. The 750 Series does the rest. It quickly performs the test, calculates the errors, and displays the final results, highlighting out of tolerance points.
Enable you to map one unit to another, such as mV to ºC or ºF. Allows you to use the Fluke 750 Series with millivolt output accessories such as the Fluke 80T-IR Temperature Probe, and to document tests using non-supported units such as parts per million or revolutions per minute.
Enables technicians to record calibration results that were sourced and/or measured by other devices such as panel meters or readout-only devices.
Procedures perform fast, automated calibration of one and two-point limit switches for voltage, current, temperature, and pressure.
Routines use a square root function to directly calibrate DP flow instruments.
Calibrate temperature, pressure, voltage, current, resistance, and frequency. Since it both measures and sources, you can troubleshoot and calibrate all with one rugged tool.
The easy-to-follow menu-driven display guides you through any task. Get up to speed in minutes, not days. Programmable calibration routines enable you to create and run automated as-found/as-left procedures to ensure fast, consistent, calibrations.
To support your ISO-9000 or regulatory standards the Fluke 754 captures your calibration results, eliminating the need to juggle a pen and pad in the field. The USB interface lets you transfer the results to a PC, thus saving the time of having to manually transcribe them when you return to the shop.
Small enough to fit easily into a tool bag and to use in tight spaces. Runs an entire shift on a rechargeable Li-ion battery pack.
Count on Fluke's rugged design to deliver top accuracy and reliability in harsh environments. Overmolded urethane case stands up to rough handling in industrial environments.
Lets you read your results in any kind of light. Backlight has three (3) settings.
Provide one-touch access to enhanced functions such as task lists, automated procedures, scaling, min/max, stepping and ramping, and review memory.
Measure, Source, or simultaneous Measure/Source, - enable technicians to troubleshoot, calibrate, or maintain instrumentation with just one tool.
Displays instructions in English, French, German, Spanish, and Italian.
With four functions-plus square root-stores, recalls, and performs calculations required for setting up instruments or evaluating data in the field. Use it to set the source function to a calculated value. There's no need to carry a pencil and paper or a separate calculator.
Inside automated procedures permits calibrating instruments that respond slowly.
|AC220||SureGrip™ Alligator Clips|
|AC280||SureGrip™ Hook Clips|
|AC285||SureGrip™ Alligator Clips|
|TP74||Lantern Tip Test Probes|
|TP920||Test Probe Adapter Set|
|C700||Hard Carrying Case|
|C799||Soft Field Case|
|700P00||Differential Pressure Module 1 in. H2O (0.25 kPa)|
|700P01||Differential Pressure Module 1 in. H2O (0.25 kPa)|
|700P02||Differential Pressure Module 1 psi (6900 Pa)|
|700P03||Differential Pressure Module 5 psi (34 kPa)|
|700P04||Differential Pressure Module 15 psi (103 kPa)|
|FLUKE-700PCK||Pressure Module Calibration Kit (Required for using 700 Series Pressure Modules with the 5520A Multi-Product Calibrator)|
|700PMP||Pressure Pump 150 psi (10 bar)|
|700HTH-1||Fluke 700HTH-1 Hydraulic Test Hose|
|700PRV-1||Fluke 700PRV-1 Pressure Relief Valve Kit|
|700PTP-1||Fluke 700PTP-1 Pneumatic Test Pump|
|700HTP-2||Hydraulic Test Pump|
|700TLK||Fluke 700TLK Process Test lead kit|
|700P22||Differential Pressure Module Wet 1 psi (6900 Pa)|
|700P23||Differential Pressure Module Wet 5 psi (34 kPa)|
|700P24||Differential Pressure Module Wet 15 psi (103 kPa)|
|700PA3||Absolute Pressure Module 5 psi (34 kPa)|
|700PA4||Absolute Pressure Module 15 psi (103 kPa)|
|700PA5||Absolute Pressure Module 30 psi (207 kPa)|
|700PA6||Absolute Pressure Module 100 psi (690 kPa)|
|80CJ-M||Type J Male Mini-Connectors|
|80CK-M||Type K Male Mini-Connectors|
|80PJ-EXT||Extension Wire Kit|
|80PK-1||Bead Probe (Type K)|
|80PK-22||SureGrip™ Immersion Temperature Probe|