MNR 180 Precision Pressure Regulator
Designed for precise control of gas pressure up to a maximum (output) pressure of 250 bar.
- Precise control of regulated pressure
- No dead band and low torque pressure setting
- Compact design suitable for panel mount
- Monitoring ports included as standard
The Minerva MNR 180 Precision Pressure Regulator is designed for precise control of gas pressure up to a maximum (output) pressure of 250 bar.
In test and calibration set up the it is very important that the regulated gas pres- sure can be set accurately without any dead band and with the smallest torque possible. These features are incorporated in the design essential for a closed or dead end system. The regulator is self venting.
The regulator has standard 4 pressure ports being an inlet port and outlet port including two monitoring ports. The moni- toring ports enable both inlet and outlet pressure to be measured and displayed.
The regulator is designed for applicati- ons in test and calibration set ups.
| Models | MNR 180-60 MNR 180-100 MNR 180-160 MNR 180-250
0-60 bar pressure range (6 MPa / 1000 psi) 0-100 bar pressure range (10 MPa / 1500 psi) 0-160 bar pressure range (16 MPa / 2500 psi) 0-250 bar pressure range (25 MPa / 3500 psi) |
| Pressure connections | 1/8” NPT female (4x) |
| Dimensions | 140 x 50 mm (length x diameter) |
| Weight | Approx. 1400 gram |
| Operating temperature | -15°C to + 70°C / -59°F to 158°F |
| Media | Nitrogen or compressed air |
| Maximum inlet pressure | 350 bar / 35 MPa / 5250 psi |
| Test pressure | 150% of max inlet pressure |
| Burst pressure | 300% of max inlet pressure |
| Material: | |
| Body | brass chrome plated |
| Seals | Buna-n |
| Seats | Kel-F |
Related products:
• MNR 125 Pressure gauge test stand
• MNR 150 Hydraulic comparison test pump
