Autonomous high pressure supply and adjustment system for Beamex MC5 and MC6 Multifunction Calibrator. New: The IS version of the case available to be used in combination with the Beamex MC6 ex.
This case offers improved efficiency to quickly and safely perform clean, high pressure calibrations at your own location.
Self contained unit provides pneumatic pressure for calibration and testing up to 250 bar using a Beamex MC6 (Ex) multifunction calibrator with pressure module.
The unit is designed as an additional tool for your Beamex MC6 multifunction calibrator allowing fast and safe generation of high pneumatic pressure up to max 20 MPa.
© Minerva Meettechniek B.V. all rights reserved
[et_pb_column type="4_4"][et_pb_text admin_label="Text"]
The built-in high pressure gas storage system is filled through the appropriate connection. Three separate monitor gauges are mounted to indicate storage system pressure, regulated pressure and pressure at test ports. The maximum test pressure is set using the supply regulator. The test pressure at the two test connections is precisely controlled by two fine metering needle valves and the pressure balanced volume adjuster.
The installed Beamex MC5/6 multifunction calibrator displays the test pressure. Externally generated pressures can also be measured via the test connections. The instrument is supplied with quick-connect test and filling hose, a 1⁄4" NPT male adaptor for the test connection and filling and a refill connector.
Are you using the High Pressure Case in situations that require an IS calibrator? Then choose the IEC/ATEX certified case, especially designed and certified for controlling conditions in an explosive atmosphere.
|Pressure ranges||See Beamex MC6 digital pressure modules supported table in brochure|
|Pressure measurement specs||See Beamex MC6 digital pressure modules supported table in brochure|
|MNR 350 control range||0 - 20 MPa gauge pressure|
|Gas storage system||2 x 1 litre capacity, filling pressure limited to 28 MPa, tested to 45 MPa|
|Monitor gauges||40 mm, analogue, all stainless steel:
gas bottle pressure, regulated supply pressure, pressure at test port
|Pressure regulator||Minerva Model 180 high pressure regulator, Range 0 - 25 MPa|
|Volume adjuster||Minerva Model 90, pressure balanced volume adjuster, displacement 11 cm3 max 67 turn, precise pressure setting to within 100 Pa, stainless steel interior|
|Needle valves||Fine control valve for test pressure inlet and exhaust|
|Connections||Low volume Minimess 1215, quick connect couplings with internal check valve|
|Test / filling hose||Minimess 1215, length 2 meter, including 1⁄4" NPT male connector|
|Refill connection||For connection to nitrogen bottle, standard RU-3|
|Quick lock system in lid||Quick lock system for storing test hose and test connector|
|Housing||Pelicase. Material: ultra high impact copolymer|
|Dimensions||405 x 295 x 255 mm (L x W x H)|
|Weight||Approx. 19 kg|
|Certification||Pressure Equipment Directive (PED), Transportable Pressure Equipment Directive (TPED), CE conformity declaration|
|ATEX zone||II 3G Ex ic IIB T6 Gc (-10°C ≤ Ta ≤ +50°C)|
|Accessories included||2 meter test / filling hose, 1⁄4" NPT male test adaptor, RU-3 refill connection|
|Documentation included||Manual, PED conformity declaration, TPED conformity declaration, CE declaration|
|Ordering code||MNR-350-BMC5 or MNR-350-BMC6|
|Ordering code ATEX version||MNR-350-BMC6-ex|
|MNR 350 - BMC5/6||Autonomous high pressure supply and adjustment system for Beamex MC5 or MC6 Multifunction Calibrator|
|MNR 350 BMC6-ex||
ATEX version of this case for Beamex MC6-ex
Brochures for non-ATEX versions of this case are available in German, Spanish, French and Italian: