Fluke 718 Series Pressure Calibrator with Pressure/Vacuum Pump

The Fluke 718 pressure calibrator family (includes 4 models) provide a total pressure calibration solution for transmitters, gauges and switches.

 

The complete solution to pressure calibration

The Fluke 718 pressure calibrator family (includes 4 models) provide a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.

  • Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
  • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
  • Error % calculation for quicker pass/fail decision making in the field
  • Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage
  • Min/Max/Hold to capture changing measurements
  • Switch test feature for quicker and more accurate pressure switch testing
  • New 1 and 300 PSI pressure ranges mean fewer extra tools required
  • 1, 30, 100 & 300 PSI ranges now available

 

 

 

Technical Specifications

Standard
718 Series
Measure Pressure  (internal sensor)
Accuracy  0.025% full scale
Functions  zero, min/max, hold, damp
Note:  Dry air, non-corrosives only
718 1G
Range:  -1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
Resolution:  0.0001 psi, 0.001 mbar, 0.0001 kPa
Over Pressure:  5x Full Scale
Functions:  Zero, Min, Max, Hold, Damp
718 30G
Range:  -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa)
Resolution:  0.001 psi, 0.1 mbar, 0.01 kPa
Over Pressure:  5x Full Scale
Functions:  Zero, Min, Max, Hold, Damp
718 100G
Range:  -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa)
Resolution:  0.01 psi, 0.1 mbar, 0.01 kPa
Over Pressure:  2x Full Scale
Functions:  Zero, Min, Max, Hold, Damp
718 300G
Range:  -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )
Resolution:  0.01 psi, 1 mbar, 0.1 kPa
Over Pressure:  375 PSI 25 bar
Functions:  Zero, Min, Max, Hold, Damp
Fluke 718 series via using 700 Series Pressure Modules
Range:  29 pressure modules, 0 – 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs
Resolution:  Per pressure module specs
Accuracy:  To 0.025 % of full span, per pressure module specs
Functions:  Zero, Min, Max, Hold, Damp
 Note: media compatibility per pressure module specs
Fluke 718 series via built in pump
Range:  -12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm
Loop Power:  Range: 24 V dc
 Accuracy: +/- 10 %
 Note: Drive; 20 mA into 1000 Ω for battery > 6.8V; 700 Ω for battery 5.8 to 6.8 V
mA Measure:  Range: 0 mA to 24 mA
 Resolution: 0.001 mA
 Accuracy: 0.015 % + 1 count

General Specifications

Maximum voltage
 30 volts: Non-operating
Temperature
 -40 °C to 60 °C
Operating Temperature
 -10 °C to 55° C
Relative Humidity
 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating Altitude
 3,000 M max
Shock
 1 M drop test
Vibration
 Random, 2 g, 5 Hz – 500 Hz
Safety
 CSA C22.2 No. 1010.1: 1992
EMC
 EN50082-1: 1992 and EN55022: 1994 Class B
Size
 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in)
Weight
 992 g (35 oz)
Power, battery life
 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery Life
 4 to 20 hours typical, depending on functions used
Warranty
 Three years (one year on pressure pump in Fluke 718)
Display
 LCD, 5 digit pressure and current simultaneous
Note
 For use with non-corrosive gasses
 

 

Model Name

Description

Fluke 718 1G Pressure Calibrator -1 to 1 PSI, (-68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa) All models include:
  • Protective Yellow Holster with test lead storage
  • Instructions Sheet (14 languages)
  • Test Leads and Alligator Clip
  • Two 9V alkaline batteries
  • NIST - Traceable calibration report and data
Fluke 718 30G Pressure Calibrator -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa)
Fluke 718 100G Pressure Calibrator -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa)
Fluke 718 300G Pressure Calibrator -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )

Accessories common to all models:

Accessory

Description

G3P-Group2
  • GOLD CarePlan.
  • Models covered: 51-2, 52-2, 53-2, 54-2, 192C, 381, 705, 707, 712, 714, 715, 717, 718, 719, 744, 787, 789, 1550C, 1577, and 1587.
  • Extends warranty from three to five years and includes five annual NIST traceable calibrations with data.
S3P-Group2
  • SILVER CarePlan.
  • Models covered: 51-2, 52-2, 53-2, 54-2, 192C, 381, 705, 707, 712, 714, 715, 717, 718, 719, 744, 787, 789, 1550C, 1577, and 1587.
  • Extends warranty from three to five years.
AC220 SureGrip™ Alligator Clips
AC175  Alligator Clip Set
TP220 SureGrip™ Industrial Test Probes
700P00 Differential Pressure Module 1 in. H2O (0.25 kPa)
700P01 Differential Pressure Module 1 in. H2O (0.25 kPa)
700P02 Differential Pressure Module 1 psi (6900 Pa)
700P03 Differential Pressure Module 5 psi (34 kPa)
700P04 Differential Pressure Module 15 psi (103 kPa)
700PMP Pressure Pump 150 psi (10 bar)
700HTH-1 Fluke 700HTH-1 Hydraulic Test Hose
700ILF In-line Filter
700PRV-1 Fluke 700PRV-1 Pressure Relief Valve Kit
700PTP-1 Fluke 700PTP-1 Pneumatic Test Pump
700HTP-2 Hydraulic Test Pump
700P22 Differential Pressure Module Wet 1 psi (6900 Pa)
700P23 Differential Pressure Module Wet 5 psi (34 kPa)
700P24 Differential Pressure Module Wet 15 psi (103 kPa)
700PA3 Absolute Pressure Module 5 psi (34 kPa)
700PA4 Absolute Pressure Module 15 psi (103 kPa)
700PA5 Absolute Pressure Module 30 psi (207 kPa)
700PA6 Absolute Pressure Module 100 psi (690 kPa)
C101 Hard Case
C550 Tool Bag
C789 Meter & Accessory Case
CXT170 Extreme Case
700PD2 Dual Pressure Module ±1 psi (±6900 Pa)
700PD3 Dual Pressure Module ±5 psi (±34 kPa)
700PD4 Dual Pressure Module ±15 psi (±103 kPa)
700PD5 Dual Pressure Module –15 to 30 psi (–100 to 207 kPa)
700PD6 Dual Pressure Module –15 to 100 psi (–100 to 690 kPa)
700PD7 Dual Pressure Module –15 to 200 psi (–100 to 1380 kPa)
700PV3 Vacuum Pressure Module –5 psi (–34 kPa)
700PV4 Vacuum Pressure Module –15 psi (–103 kPa)
TL220 SureGrip™ Industrial Test Lead Set
TL221 SureGrip™ Test Lead Extension Set
TL224 SureGrip™ Insulated Test Leads
TL71 Test Lead Set
TL75 Hard Point™ Test Lead Set
 

Request a quote - Shop

  • Any additional requirements? Please let us know.
  • This field is for validation purposes and should be left unchanged.