MNR 520 & MNR 530 Minerva Upgrade Kits

Upgrade kits for installing Desgranges & Huot piston/cylinders in Fluke PG7000 piston gauges platform.

  • Type 5000 piston cylinders can be used with PG7000 piston gauge platforms.
  • Type 5000 oil (5300 Series) or gas operated (5200 Series) piston-cylinders, can be converted into PG7302 (oil) or PG7202 (gas) piston-cylinder modules.
  • Type 5000 piston cylinders can be upgraded to PG7000 piston-cylinder modules at competitive cost.

 

Users of D&H Type 5000 piston gauges can now enjoy the benefits of PG7000’s features without losing their investment in Type 5000 metrology and the continuity of their metrological elements.

  • Upgrade D&H piston gauge system to latest metrological technology
  • Maintain continuity of your metrological elements/data
  • Use the enhancements in fundamental metrological performance with new functions and features
  • Reduced investment
  • Plug & play solution
  • Provided with accredited calibration certificate before and after upgrade

Technical specifications & ordering details

All piston-cylinders are integrated modules including mounting hardware delivered in individual shipping and storage bullet cases.

   
   
Mounting system  MNR 520-DHxxxx  Negative free deformation
 MNR 530-DHxxxx  Simple free deformation
   

 

Oil lubricated piston cylinder for gas piston gauge

 
Ordering code: Description:
MNR-520-DH200KPa-upgkit Upgrade kit D&H 5200 p/c (Kn 200 KPa/kg) for PG7200
MNR-520-DH500KPa-upgkit Upgrade kit D&H 5200 p/c (Kn 500 KPa/kg) for PG7200
MNR-520-DH1,0MPa-upgkit Upgrade kit D&H 5200 p/c (Kn 1,0 MPa/kg) for PG7200
MNR-520-DH2,0MPa-upgkit Upgrade kit D&H 5200 p/c (Kn 2,0 MPa/kg) for PG7200
MNR-520-DH50psi-upgkit Upgrade kit D&H 5200 p/c (Kn 50 psi/kg) for PG7200
MNR-520-DH100psi-upgkit Upgrade kit D&H 5200 p/c (Kn 100 psi/kg) for PG7200
MNR-520-DH200psi-upgkit Upgrade kit D&H 5200 p/c (Kn 200 psi/kg) for PG7200
MNR-520-DH250psi-upgkit Upgrade kit D&H 5200 p/c (Kn 250 psi/kg) for PG7200
MNR-520-DH300psi-upgkit Upgrade kit D&H 5200 p/c (Kn 300 psi/kg) for PG7200

Oil lubricated piston cylinder for hydraulic piston gauge

Ordering Code: Description:
MNR-530-DH100KPa-upgkit Upgrade kit D&H 5300 p/c (Kn 100 KPa/kg) for PG7300
MNR-530-DH200KPa-upgkit Upgrade kit D&H 5300 p/c (Kn 200 KPa/kg) for PG7300
MNR-530-DH500KPa-upgkit Upgrade kit D&H 5300 p/c (Kn 500 KPa/kg) for PG7300
MNR-530-DH1,0MPa-upgkit Upgrade kit D&H 5300 p/c (Kn 1,0 MPa/kg) for PG7300
MNR-530-DH2,0MPa-upgkit Upgrade kit D&H 5300 p/c (Kn 2,0 MPa/kg) for PG7300
MNR-530-DH5,0MPa-upgkit Upgrade kit D&H 5300 p/c (Kn 5,0 MPa/kg) for PG7300
MNR-530-DH20psi-upgkit Upgrade kit D&H 5300 p/c (Kn 20 psi/kg) for PG7300
MNR-530-DH50psi-upgkit Upgrade kit D&H 5300 p/c (Kn 50 psi/kg) for PG7300
MNR-530-DH100psi-upgkit Upgrade kit D&H 5300 p/c (Kn 100 psi/kg) for PG7300
MNR-530-DH200psi-upgkit Upgrade kit D&H 5300 p/c (Kn 200 psi/kg) for PG7300
MNR-530-DH250psi-upgkit Upgrade kit D&H 5300 p/c (Kn 250 psi/kg) for PG7300
MNR-530-DH300psi-upgkit Upgrade kit D&H 5300 p/c (Kn 300 psi/kg) for PG7300
MNR-530-DH500psi-upgkit Upgrade kit D&H 5300 p/c (Kn 500 psi/kg) for PG7300

 

Upgrade Procedure

Upgrade your Type 5000 Piston Gauge and enjoy the high-end benefits!

Users of Type 5000 piston gauges enjoy the benefits of PG7000’s features without losing their investment in Type 5000 metrology and the continuity of their metrological elements by following this procedure:

  • Your Desgranges & Huot Type 5000 piston/cylinder¹ are checked on performance at Minerva.
  • The piston is modified to fit the PG7000 module.
  • Once installed in the PG7000 module, the piston mass is tared and calibrated using the Minerva standard PG7000 module calibration procedure. It will be delivered with an ISO/IEC 17025 accredited calibration report. The calibration report shows true mass and effective area.

¹note: if you own a 20.000 or 24.000 digital pressure balance, please check with Minerva to discuss the upgrade options.

Request a quote - Shop

  • Any additional requirements? Please let us know.
  • This field is for validation purposes and should be left unchanged.