GB-H-152-70M and GB-H-152-100M are gas booster packages intended to be used to provide the gas pressure supplies
GB-H-152-70M and GB-H-152-100M are gas booster packages intended to be used to provide the gas pressure supplies required by Fluke Calibration PPCH-G controller/calibrators for high pressure gas.
The gas booster boosts a lower pressure usually supplied from a bottle, to higher pressure. The high pressure gas is stored in an accumulator volume to assure stable supply to the PPCH-G. GB-H-152-70M has a maximum output pressure of 100 MPa (15 000 psi). GB-H-152-100M has a maximum output of 120 MPa (18,000 psi).
Both models also include an independent low pressure output to supply the PPCH-G drive air requirement.
With a GB-H-152 gas booster, all of the PPCH-G pressure supply requirements are taken care of in one simple package requiring only the connection of a test gas source and a drive air supply to power the booster.
GB-H-152 Gas Booster Package General Specifications
|Dimensions||50 cm (20 in.) H x 57 (22.5 in.) W x 30 (12 in.) D|
|Weight||44.4 kg (98 lb)|
|Drive air pressure supply|
|Range||0.15 to 1 MPa (20 to 150 psi)|
|Flow||425 to 2 125 slm (15 to 75 scfm)|
|Test gas pressure supply|
|Range||4.8 to 40 MPa (700 to 6 000 psi)|
|Flow||140 to 560 slm (5 to 20 scfm)|
|GB-H-152-70M||0.70 to 100 MPa (400 to 15 000 psi)|
|GB-H-152-100M||0.35 to 120 MPa (200 to 17 400 psi)|
|Operating media||air, helium, nitrogen|
|Drive Air Supply||1/4 in. NPT female|
|Shop Drive out||1/4 in. Swage|
|Test Gas Pressure Supply||1/8 in. NPT female|
|High Pressure Out||DH500F (DH500 is a gland and collar type fitting for 1/4 in. (6.35 mm) coned and left hand threaded tube. DH500 is equivalent to AE F250C, HIP HF4, etc.)|
|Nominal Gas Booster Piston Ratio||152:1|
|High Pressure Accumulator Volume||150 cc (9.2 in.3)|